|
|
Silver-Line Pro-12 Sander
The Pro-12 from Silver-Line is the best machine for gyms and large halls. Designed with the professional floor contractor in mind, the Pro-12 provides you with the power to cut and the ability to finish the job.
The Pro-12 offers a 5HP universal brush driven motor, the strongest motor available to the Hardwood Floor Trade. With the four setting foot pedal located on the back of the Pro-12 chassis, changing the pressure settings is made quick and easy. The wide wheel base and the low center of gravity of the Pro-12 offers not only better control of the machine but also a better view of your work.
As with all Silver-Line equipment and parts, the Pro-12 is hand built, tested and manufactured in the USA to assure quality and dependability. The Pro-12 is also available in 220 volt, 50 hertz model for our International customers.
Engineered for performance and built to last. The Pro-12 features a 12" spring loaded, self tensioning drum. This next generation of drums offers quick release bearing caps to make drum replacement easy.
No Shims, No Chatter! The springs and cams of the Pro-12 work together to assure proper sandpaper installation. The dual pulley system featured on the Pro-12 allows the drum to run at either 2400 or 2800 RPM. The drum belt on the Pro-12 can also be quickly changed by switching between power or speed.
Standard Equipment:
62.5' Solar Polar 10/3 power cord with female twist lock connector for the motor, dust bag, paper template, all wrenches, operator's belt & carry handle.
Guaranteed:
Silver-Line floor sanding machines are fully guaranteed for one year against factory defects
Over-All Dimensions:
Length of Chassis: 25", Length with Handle: 38", Width: 15", Wheel base: 10", Height to motor: 18", Height to Handle: 39"
Specifications:
Construction - Accurately machined interchangeable parts of highly polished aluminum alloys, with quick release bearing caps that house the drum.
Motor - 3 HP universal type motor, 220 volt, 60 Hz, single phase, removable, 30amp on/off switch
Vacuum - Large vacuum fan assembly for superior dust pick up that can be removed easily for maintenance.
Drum - 8" spring loaded drum (self tensioning) high density red rubber over vulcanized rubber attached to aluminum drum core.
Drum Speed - 2400 or 2800 RPM
Wheels - Felt cover on aluminum core with two (2) #6202 Sealed Bearings
Belts - Positive Drive Cog belt runs drum, "V" belts run fan & idler
Pressure Adjustment - 4 position foot pedals adjust from 25, 50, 75 to 100% of available pressure of machine.
Net Weight - 210 lbs.
Weight w/o Motor - 105 lbs.
Shipping Weight - 250 lbs.
|
